Here we show a simple trick to, how to fix an overexposed photo in photoshop. Taking photo from mobile phone is now common but many times photo is overexposed.
how to fix an overexposed photo in photoshop
Tired of blurry, dark and grainy photos from your camera phone? Typically the cameras in mobile/cellular phones suffer from grainy, dark images that have some bright or dark spots on them. We’ll show you some tricks with Adobe Photoshop for correction to your problematic photos you’ve taken with your camera phone as well. In this way the smart correction adjusts it’s correction over time to exactly what you are looking for with Adobe Photoshop.
First, find any photo which you want to do correction in it.
Here I’m going with this pic.
how to fix an overexposed photo in photoshop
Step1: We want to increase some contrast so to do this automatically go to Image > Adjustment > Auto Contrast (Shift+Ctrl+Alt+L)
Step2: Then again go to Image > Adjustment > Lavels, (Ctrl+L) & put the values which we given below.
Step3: Then go to Image > Adjustment > Curves, (Ctrl+M) & put the values which we given below.
Step4: After that go to Image > Adjustment > Color Balance, (Ctrl+B) & put the values which we given below and click to ok.
Now our image looking like this:
But we can see some pixelate area near the car so we took Brush Tool and reduced the flow to 1% & brush on that area with the Gray color.
Now our Image looking like this:
Step5: And finally go to Image > Adjustment > Brightness/Contrast & put these values which we given below, or you can play around them as per your satisfaction.
Here’s my original image once again to comparison:
And here, our final Image after applying all the steps:
This Adobe Photoshop tutorial, we’re going to learn how to easily make a photo look more like a watercolor painting. This photo effect works best on images where maintaining rich colors and strong contrast is more important than keeping any fine details, since you’ll be losing a lot of detail with this effect.
convert photo into realistic watercolor painting
Creating the effect is as simple as duplicating some layers, applying a few filters, and using a few different layer blend modes, and the whole thing takes only a couple of minutes from start to finish.
Any recent version of Photoshop will work just fine.
Here’s the image I’ll be using for this Photoshop tutorial:
convert photo into realistic watercolor painting
And here’s how it’ll look after applying our watercolor painting effect.
convert photo into realistic watercolor painting
Let’s get started.
Step 1: Duplicate The Backgroung Layer Three Times
With the image newly opened in Photoshop, if we look in our Layers palette, we can see that we currently have one layer, the Background layer, which contains our image:
Photoshop Effects: The Layers palette in Photoshop showing the image on the Background layer, which contains our image.
We need to create three copies of the Background layer, so use the keyboard shortcut Ctrl+J (Win) / Command+J (Mac) three times to duplicate the Background layer three times. If we look again in our Layers palette, we can see that we now have four layers, with the original Background layer on the bottom and three copies above it:
Photoshop Effects: Photoshop’s Layer palette now showing my Background layer and the copy above it.
Step 2: Turn Off The Top Two Layers
On the far left of each layer in the Layers palette, you’ll see a small eyeball icon. This is the Layer Visibility icon, and it determines whether or not the layer is currently visible in the Photoshop document. When the eyeball icon is visible, it means the layer itself is visible. Click on the icon for the top two layers in the Layers palette to temporarily hide them from view inside the document. When you click on the icon, it disappears, letting you know that the layer is no longer visible:
Photoshop Effects: Photoshop’s Layer palette now showing my Background layer and the copy above it.
Step 3: Select “Layer 1”
With the top two layers temporarily hidden from view, click on “Layer 1” in the Layers palette to select it. You’ll know which layer is selected because the currently selected layer is highlighted in blue:
Photoshop Effects: Click on “Layer 1” in the layers palette to select it.
Step 4: Apply The Cutout Filter
The first thing we’re going to do is simplify our image, and we can do that using Photoshop’s “Cutout” filter. With “Layer 1” selected, go up to the Filter menu at the top of the screen, choose Artistic , and then choose Cutout.
When the Cutout filter’s dialog box appears, set the Number of Levels to 4 , Edge Simplicity to 4 , and Edge Fidelity to 2 :
Photoshop Effects: Go to Filter > Artistic > Cut Out and change the options circled in red above.
Click OK when you’re done to apply the settings and exit out of the dialog box. Step 5: Change The Blend Mode Of “Layer 1” to “Luminosity”
With “Layer 1” still selected, go up to the Blend Mode options in the top left of the Layers palette. By default, layers are set to the “Normal” blend mode. Click on the down-pointing arrow to the right of the word “Normal” and select the Luminosity blend mode from the bottom of the list:
Photoshop Effects: Change the blend mode of “Layer 1” from “Normal” to “Luminosity”.
Your image should now look something like this:
Photoshop Effects: The image after changing the blend mode of “Layer 1” to “Luminosity”.
Step 6: Turn On The Layer Above “Layer 1” And Select The Layer
Still in the Layers palette, click inside the empty square where the eyeball icon used to be on the layer directly above “Layer 1” (“Layer 1 copy”) to turn that layer back on, so it’s visible again inside the document. Turning a layer back on doesn’t actually select the layer though, and we need to have it selected as well, so once you’ve turned the layer back on, click anywhere else on “Layer 1 copy” to select it so it’s highlighted in blue:
Photoshop Effects: Click on the visibility icon (the empty square for “Layer 1 copy” to turn it back on, then click enywhere else on the layer to select it.
Step 7: Apply The “Dry Brush” Filter
We’re going to add some texture to our image at this point. With “Layer 1 copy” selected and visible once again inside the document, go back up to the Filter menu at the top of the screen, choose Artistic once again, and this time, choose Dry Brush. When the Dry Brush filter’s dialog box appears, set the Brush Size to 10, the Brush Detail to 10, and the Texture option to 3:
Photoshop Effects: Go to Filter > Artistic > Dry Brush and change the options circled in red above.
Click OK when you’re done to apply the filter and exit out of the dialog box.
Step 8: Change The Layer Blend Mode To “Screen”
With “Layer 1 copy” still selected, go up to the Blend Mode options once again in the top left of the Layers palette, click on the down-pointing arrow to the right of the word “Normal”, and change the blend mode for the layer to Screen :
Photoshop Effects: Change the blend mode of “Layer 1 copy” to “Screen”.
Your image should now look something like this:
Photoshop Effects: The image appears brighter after changing the blend mode of “Layer 1 copy” to “Screen”.
Step 9: Apply The Cutout Filter
Just as we did with “Layer 1 copy” a moment ago, click inside the empty square where the eyeball icon used to be on the top layer in the Layers palette (“Layer 1 copy 2”) to turn the layer back on and make it visible once again inside the document. Then click anywhere else on the layer to select it so it’s highlighted in blue:
Photoshop Effects: Turn the top layer back on by clicking on its Layer Visibility icon in the Layers palette, then click anywhere else to select the layer.
Step 10: Apply The “Median” Filter
With the top layer selected and visible again inside the document, go back up to the Filter menu at the top of the screen, this time choose Noise , and then choose Median . The Median filter will remove even more detail from the image, and the nice thing about it is that it does so without blurring the image so edges remain well defined. When the Median Filter’s dialog box appears, set the Radius value at the bottom to 12 pixels :
Photoshop Effects: Go to Filter > Noise > Median and set the “Radius” value to “12 pixels”.
Click OK when you’re done to apply the filter and exit out of the dialog box.
Step 11: Change The Blend Mode Of The Top Layer To “Soft Light”
To complete the effect, with the top layer still selected, go up to the Blend Mode options in the top left of the Layers palette, click again on the down-pointing arrow to the right of the word “Normal”, and change the layer’s blend mode to Soft Light :
Photoshop Effects: Change the blend mode of the top layer to “Soft Light” to complete the effect.
Once you’ve change the blend mode to “Soft Light”, you’re done!
Here’s my original image once again to comparison:
Photoshop Effects: The original image once again.
And here, after applying the Median filter to the top layer and changing its blend mode to “Soft Light”, is my final “watercolor painting” effect:
Photoshop Effects: The final watercolor painting effect.
create those kinds of special effects for my favorites sightseeing images. we created Unbelievable lighting effect using photoshop, Here we given tutorial
Unbelievable lighting effect using photoshop
Sometimes, when watching film, I was really impressive by many wonderful sightseeing which we could never see in the real-life. Now, with Photoshop, I am able to create those kinds of special effects for my favorites sightseeing images. The final result is the peaceful, mysterious and beautiful sunset on the highland. I hope that I could see this effect even just once in my life. Now, let ’s do this.
Step 1: Prepare a pic similar like below,which you can clearly see the sky line :
Unbelievable lighting effect using photoshopStep 2: Use Soft Round Brush,size doesn’t matter but the opacity is only around 10-15% and turn on Air Brush setting.First choose black,and paint one or two times over the forest (don’t touch the sky since the sky will be go over by different color later).Then use #ad651a (or you can use a lighter version of it,since the opacity is around 10-15%,some small different won’t matter,but beware,do not make the color go any darker),go over the sky,try to go all the place just once.You will have something similar to the pic below.
Then,click the icon next to the “Quick Mask” on the layer tab,and then choose Curves ,and make the line go like the pic below.
You will have result as below.
Step 3: From now,any new layers will be created in the middle of the original layer and the “Curves” layer.
Create a new layer,fill it with black.Then add Lens Flare on it,choose the first type of Len Flares(75%) and try to keep it in the center.
Step 4: Then,use Filter>Blur>Gaussian Blur>Radius : 68.
Again,choose Soft Round Brush,with the same settings like the beginning,but with the color #fee020 .Then start to brush,the starting point will be the flare,brush down.
Keep brush down,make the flare center,to make it looks like the flare is spreading them.Do it till you have something similar like below.
Step 5: After that,go to Blending Option,choose Blend Mode as “Linear Dodge” .You will have result as below.
Step 6: Duplicate the Len Flare layer once,and put the duplicated one on top of it,then go to Blending Option,choose Blend Mode of the duplicated one as “Lighten” .
Finally,duplicated the original Len Flare one more time,and put this new layer on top of all layers (except the “Curves” layer),go to Blending Option,and choose the Blend Mode as “Screen” .The result will be like below.
You might want to check the order of the layers:
Step 7: In addition,you can add something more to blend things better (not recommended if you are satisfied with result).Choose the color #ff9e39 ,and use the same brush settings,then brush from left to right at the place where the sky and the forest meets.(You can go over and over several times until you feel it is fine). Like this screenshotAnd,it is done.
Unbelievable lighting effect using photoshop
Here in this article, we will show you, how to add snow to a photo in photoshop. we given some very simple steps with shortcuts and screenshots.
how to add snow to a photo in photoshop
This very easy tutorial will tell you how you can add snow to your photo. I’m using a city at night photo.
Step 1: Open your file (file>open or ctrl+o)
how to add snow to a photo in photoshop
Step 2: Create a new layer (layer>new>layer or shift+ctrl+N)
Step 3: Change the layer mode to screen
Step 4: Filling the layer with black by changing the foreground layer into black, and click on layer2 in your layer pallete, and press Alt +Backspace
Step 5: Apply the graphic pen filter (filter>sketch>graphic pen), below is my setting. You can experiment with stroke pen & light/dark balance to get the best result.
Step 6: Apply the gaussian blur filter (filter>blur>gaussian blur), I put 1.5 pixel radius, but again..you can play around with it to get the best result.
Step 7: Now lower the opacity to around 70%, and you’re done!
Final output will be like this.
We have some pictures, famous photographs that tell different story. When we shoot photo that is all passion. Photography is big and very subject. Check some very nice pictures.
Photography is all about the relationship between light and perspective, and nowhere is this made clearer than in these hilarious two-faced photos, where the subjects and the shadows that they cast tell two (often very different) stories.
photographs that tell different story
flying plane on wire
photographs that tell different story
Perhaps its fate, and one day the couple will be together forever… romantics everywhere can dream, right? Sort of makes you wonder if shadows like this appear for a brief moment throughout your life unnoticed.
We collected Best photoshop fire effects images. Through photoshop we can create photoshop fire effects. we have nice photoshop fire effects images in post.
Best photoshop fire effects
Here is some very cool fire effects made in photoshop.
Best photoshop fire effects
Showing a realistic, fire effect in photoshop is a bit tough, but in this tutorial we will learn how to use photoshop to render realistic flames and create a dramatic artwork in few simple and easy steps..
In this article, We given full steps with screen-shot. Using this article you can Create new sunset effect using PhotoShop. We given tips for using photoshop.
Create new sunset effect using PhotoShop
Select a photo, which is having sky background search in goggle
Now create duplicate of photo
Select brush tool with 20 opacity select black color & fill on ground side to top side on image
In this tutorial we are going to be show you how to Create smooth wind effect in PhotoShop. we given full steps and snap shots the full description.
Create smooth wind effect in PhotoShop
First select a text here I selected wind
Now select layer >> rasterize >> type
That we can modify our text
Select filter >> stylize >> wind
t is a best tool in PhotoShop that you can use on text
In wind effect have methods wind, blast, and stagger you can also make direction
Front to right or front to left whichever is best for our text we can select
Here is select wind with the direction of front to right
Create smooth wind effect in PhotoShop
Now go to filter select liquefy effect
Select fast wrap tools & on the text drag left to right direction
So you wind text effect is ready now
